12+MM Stroker CP3 Modification LBZ/LMM Duramax and 6.7 Cummins Only
$1,499.00
In stock
This is a service performed on your existing CP3 pump, it includes the added stroke along with the other required internal modifications to increase flow output.
We provide before and after testing results with a flow data sheet. If your pump does not pass the minimum flow requirement in the preliminary test, you will only be charged for the testing service and the return shipping charges. We will NOT modify any pump that does not meet the minimum flow specifications.
A stock CP3 will generally flow in the 200 LPH range @3500 RPM and 180 MPA. This modification can provide flow output in the 320 LPH range. This is generally enough for 850-1000+ rear wheel horsepower. Of course you are buying potential, the pump itself can only support the additional modifications.
As with modifying any customer supplied part for competition or off road use, we offer no warranty or guarantee as to longevity of the modified part.
*Price does not include return shipping cost*
**Call, Text, or E-Mail before sending your pump, as the service must be scheduled**
| Weight | 20 lbs |
|---|---|
| Dimensions | 11.875 × 10.75 × 11 in |
Related products
We are the “OG Stroker Pump” producer from 2007 until today. We start with the best pumps to base our modifications upon, if it is not new, surplus new or a used pump that provides no less than 98% volumetric efficiency, then we do not use them to build Strokers. We now make our pump [...]
This is a service performed on your existing CP3 pump, it includes the added stroke along with the other required internal modifications to increase flow output. We provide before and after testing results with a flow data sheet. If your pump does not pass the minimum flow requirement in the preliminary test, you will only [...]
The image of the pump, is the actual pump as mounted and plumbed on our testing platform. The outlet fitting will be replaced with the blanking fitting, this is a normal side outlet LBZ/LMM pump. We are the “OG Stroker Pump” producer from 2007 until today. We start with the best pumps to base our [...]
We are the “OG Stroker Pump” producer from 2007 until today. We start with the best pumps to base our modifications upon, if it is not new, surplus new or a used pump that provides no less than 98% volumetric efficiency, then we do not use them to build Strokers. We now make our pump [...]