Designed to install HP seals into the injector, prior to replacing the control valve.
This tool is engineered to safely and quickly install seals in Bosch 120 series injectors that are CRIN2 designated.
Designed to install HP seals into the injector, prior to replacing the control valve.
This tool is engineered to safely and quickly install seals in Bosch 120 series injectors that are CRIN2 designated.
Weight | 1 lbs |
---|---|
Dimensions | 4 × 1 × 1 in |
Tools
M14 x 1.5 threaded cap to close port on rail, to eliminate injector connection to the common fuel rail.
The maladies of a mechanical compression testing tool. Oh the effort of writing down those numbers, and cranking the engine while you are unable to see whether or not the needle on the gauge is moving. I have also found myself getting to the last cylinder, then realizing I may have inadvertently written down the [...]
Tools
Common rail high pressure metal line. 0.315″ OD x 0.120″ ID M14 x 1.5 swivel nuts both ends 1 90° bend on one end Primarily used for testing purposes, but these can also be used for custom applications. These can be bent with a Rigid or Eastman type HD bender for 5/16″ tubing.
Common rail high pressure metal line. 0.240″ OD x 0.078″ ID x 11.25″ long M14 x 1.5 swivel nuts both ends Primarily used for testing purposes, but these can also be used for custom applications. These can be bent with a Rigid or Eastman type HD bender for 1/4″ tubing.