M14 x 1.5 threaded cap to close port on rail, to eliminate injector connection to the common fuel rail.
Billet aluminum simultaneous valve spring compressor tool. We have incorporated a Torrington needle roller bearing assembly into the compressor nut, for bind free operation. Aluminum compressor plate for magnet use of valve lock removal. Tapered design locates the valve locks for trouble free re-installation Grade 8 fine thread compressor bolt Enclosed nut design with integral [...]
M14 x 1.5 to M14 x 1.5 threads both ends. One end connects to the injector with a 60° inverted cone, or can be connected to a fuel rail. The other end is a 60° inverted cone. Typically used for injector testing with flexible high pressure lines, or with rigid metal lines to offer angular [...]
The maladies of a mechanical compression testing tool. Oh the effort of writing down those numbers, and cranking the engine while you are unable to see whether or not the needle on the gauge is moving. I have also found myself getting to the last cylinder, then realizing I may have inadvertently written down the [...]
The MD calibration fluid is to be used exclusively in MD injector testing equipment. Sold in convenient one quart bottles. We do not manufacture this fluid, we repackage it into smaller quantities for distribution. Calibration fluid for diesel injectors MD Calibration Fluid is a low viscosity test fluid for the calibration of Diesel injection pumps [...]