M14 x 1.5 to M14 x 1.5 threads both ends. One end connects to the injector with a 60° inverted cone, or can be connected to a fuel rail. The other end is a 60° inverted cone. Typically used for injector testing with flexible high pressure lines, or with rigid metal lines to offer angular flexibility for connections to injectors.
Weight | 1 lbs |
---|---|
Dimensions | 4 × 4 × 1 in |
Related products
The maladies of a mechanical compression testing tool. Oh the effort of writing down those numbers, and cranking the engine while you are unable to see whether or not the needle on the gauge is moving. I have also found myself getting to the last cylinder, then realizing I may have inadvertently written down the [...]
Tools
Designed to install HP seals into the injector, prior to replacing the control valve. This tool is engineered to safely and quickly install seals in Bosch 120 series injectors that are CRIN3 designated.
Tools
M14 x 1.5 threaded cap to close port on rail, to eliminate injector connection to the common fuel rail.
Tools
Common rail high pressure metal line. 0.315″ OD x 0.120″ ID M14 x 1.5 swivel nuts both ends 1 90° bend on one end Primarily used for testing purposes, but these can also be used for custom applications. These can be bent with a Rigid or Eastman type HD bender for 5/16″ tubing.