M12 x M14 Elbow
Original price was: $29.95.$24.95Current price is: $24.95.
In stock
M12 x 1.5 to M14 x 1.5 threads. M12 x 1.5 end connects to the injector with a 60° inverted cone, or can be connected to a fuel rail. The other end is a M14 x 1.5 threads with a 60° inverted cone. Typically used for injector testing with flexible high pressure lines, or with rigid metal lines to offer angular flexibility for connections to injectors.
| Weight | 1 lbs |
|---|---|
| Dimensions | 4 × 4 × 1 in |
Related products
The maladies of a mechanical compression testing tool. Oh the effort of writing down those numbers, and cranking the engine while you are unable to see whether or not the needle on the gauge is moving. I have also found myself getting to the last cylinder, then realizing I may have inadvertently written down the [...]
Billet aluminum simultaneous valve spring compressor tool. We have incorporated a Torrington needle roller bearing assembly into the compressor nut, for bind free operation. Aluminum compressor plate for magnet use of valve lock removal. Tapered design locates the valve locks for trouble free re-installation Grade 8 fine thread compressor bolt Enclosed nut design with integral [...]
Tools
Designed to install HP seals into the injector, prior to replacing the control valve. This tool is engineered to safely and quickly install seals in Bosch 120 series injectors that are CRIN3 designated.
Common rail high pressure metal line. 0.240″ OD x 0.078″ ID x 11.25″ long M14 x 1.5 swivel nuts both ends Primarily used for testing purposes, but these can also be used for custom applications. These can be bent with a Rigid or Eastman type HD bender for 1/4″ tubing.