CRIN2 HP Seal Installer
$19.95
Designed to install HP seals into the injector, prior to replacing the control valve.
This tool is engineered to safely and quickly install seals in Bosch 120 series injectors that are CRIN2 designated.
| Weight | 1 lbs |
|---|---|
| Dimensions | 4 × 1 × 1 in |
Related products
Billet aluminum simultaneous valve spring compressor tool. We have incorporated a Torrington needle roller bearing assembly into the compressor nut, for bind free operation. Aluminum compressor plate for magnet use of valve lock removal. Tapered design locates the valve locks for trouble free re-installation Grade 8 fine thread compressor bolt Enclosed nut design with integral [...]
Tools
Common rail high pressure metal line. 0.315″ OD x 0.120″ ID M14 x 1.5 swivel nuts both ends 1 90° bend on one end Primarily used for testing purposes, but these can also be used for custom applications. These can be bent with a Rigid or Eastman type HD bender for 5/16″ tubing.
Tools
The MD calibration fluid is to be used exclusively in MD injector testing equipment. Sold in convenient one quart bottles. We do not manufacture this fluid, we repackage it into smaller quantities for distribution. Calibration fluid for diesel injectors MD Calibration Fluid is a low viscosity test fluid for the calibration of Diesel injection pumps [...]
Common rail high pressure metal line. 0.240″ OD x 0.078″ ID x 11.25″ long M14 x 1.5 swivel nuts both ends Primarily used for testing purposes, but these can also be used for custom applications. These can be bent with a Rigid or Eastman type HD bender for 1/4″ tubing.