M14 x 1.5 threaded cap to close port on rail, to eliminate injector connection to the common fuel rail.
Weight | 1 lbs |
---|---|
Dimensions | 2 × 2 × 2 in |
Related products
Tools
Common rail high pressure metal line. 0.315″ OD x 0.120″ ID M14 x 1.5 swivel nuts both ends 1 90° bend on one end Primarily used for testing purposes, but these can also be used for custom applications. These can be bent with a Rigid or Eastman type HD bender for 5/16″ tubing.
Tools
M14 x 1.5 to M14 x 1.5 threads both ends. One end connects to the injector with a 60° inverted cone, or can be connected to a fuel rail. The other end is a 60° inverted cone. Typically used for injector testing with flexible high pressure lines, or with rigid metal lines to offer angular [...]
Tools
M12 x 1.5 to M14 x 1.5 threads. M12 x 1.5 end connects to the injector with a 60° inverted cone, or can be connected to a fuel rail. The other end is a M14 x 1.5 threads with a 60° inverted cone. Typically used for injector testing with flexible high pressure lines, or with [...]
Tools
The MD calibration fluid is to be used exclusively in MD injector testing equipment. Sold in convenient one quart bottles. We do not manufacture this fluid, we repackage it into smaller quantities for distribution. Calibration fluid for diesel injectors MD Calibration Fluid is a low viscosity test fluid for the calibration of Diesel injection pumps [...]